Polypropylene film capacitor is a plastic film capacitor that uses a polypropylene film as its dielectric material. The polypropylene film offers very low dielectric losses, low dielectric absorption, high insulation resistance, and very high dielectric strength. Also, the film features good long term stability and moisture resistance properties. These capacitors are used where high degree of voltage range and tolerance is required. Even 1% tolerance capacitors are available and even the smallest of capacitors are available from around 100pF up to 10 nF and more range. Furthermore, they can be operated at temperature ranges up to 100 degree Celsius. Owing to their superior electrical characteristics, they are usually used in AC and pulse applications at high frequencies and in DC-Link capacitors.
Get Sample Copy:
The key factor driving the growth of the polypropylene film capacitor market includes its increasing demand in power generating and management applications in the automotive and industrial sector. A typical industry convertor consists of two sections, an AC/DC section for the conversion of grid AC voltage into DC voltage, and a DC/AC section either at a fixed or a variable frequency that could be motor drive or generator respectively. The AC/DC and DC/AC sections are connected through a link circuit in which capacitors are used to filter out the high frequency components. These capacitors must endure current at frequencies that exceed beyond 1000 Hz and must also possess high energy density. They should be also rugged and resistant to acids and bases and other chemical solvents. Since polypropylene film capacitors aptly serve these requirements, they are increasingly used in these industrial applications.
The restraint affecting the polypropylene film capacitor market includes the constantly evolving composition and construction technologies in film capacitors to deliver improved electrical performance and higher capacitance. Despite this, polypropylene film capacitors are expected to be a strong choice for mainstream electronic applications as they can be connected with differentiating features in new product design and also due to the requirement of designers to complete design and component selection quickly and with minimum complications.
Grab an exclusive PDF Brochure of this report:
Opportunity anticipated to boost the polypropylene film capacitor market includes its increasing demand in power electronics applications that includes DC output filtering, AC input filters, electronic ballasts and snubber circuits, switch mode power supplies, frequency discrimination circuits, sample-and-hold applications, and energy storage applications. Apart from these mainstream applications, polypropylene film capacitors are expected to be largely used for 400 VAC and beyond and also for specialist equipment and 3-phase industrial applications.
The polypropylene film capacitor market can be segmented on the basis of product type, application, and geography. In terms of product type, the polypropylene film capacitor market can be classified into plain polypropylene film capacitors, and metalized polypropylene film capacitors. The metallized polypropylene film capacitors can be further segmented into box type, high voltage, and others. On the basis of application, the polypropylene film capacitor market can be divided into power convertors, motor drives, solar inverter, uninterrupted power source, and others. In terms of geography, the market can be segmented into North America, Europe, Asia Pacific (APAC), Middle East & Africa (MEA), and South America. Asia Pacific is expected to be a highly attractive region contributing to the polypropylene film capacitor market owing to large number of electronic product companies and rapidly growing industrialization in the region.
Prominent players operating in the polypropylene film capacitor market include AFM Microelectronics Inc., American Technical Ceramics Corp, AVX Corporation, Johanson Dielectrics, Inc., KEMET Electronics Corporation, Knowles Corporation, Murata Manufacturing Company, Matsuo Electric Co. Ltd., CSI Capacitors, NEC Tokin Corporation, Panasonic Corporation, Maxwell Technologies, Inc., Nichicon Corporation, Samsung Electro-Mechanics Co Ltd, and Walsin Technology Corporation and so on.
The report offers a comprehensive evaluation of the market. It does so via in-depth qualitative insights, historical data, and verifiable projections about market size. The projections featured in the report have been derived using proven research methodologies and assumptions. By doing so, the research report serves as a repository of analysis and information for every facet of the market, including but not limited to: Regional markets, technology, types, and applications.
The study is a source of reliable data on:
- Market segments and sub-segments
- Market trends and dynamics
- Supply and demand
- Market size
- Current trends/opportunities/challenges
- Competitive landscape
- Technological breakthroughs
- Value chain and stakeholder analysis
The regional analysis covers:
- North America (U.S. and Canada)
- Latin America (Mexico, Brazil, Peru, Chile, and others)
- Western Europe (Germany, U.K., France, Spain, Italy, Nordic countries, Belgium, Netherlands, and Luxembourg)
- Eastern Europe (Poland and Russia)
- Asia Pacific (China, India, Japan, ASEAN, Australia, and New Zealand)
- Middle East and Africa (GCC, Southern Africa, and North Africa)
The report has been compiled through extensive primary research (through interviews, surveys, and observations of seasoned analysts) and secondary research (which entails reputable paid sources, trade journals, and industry body databases). The report also features a complete qualitative and quantitative assessment by analyzing data gathered from industry analysts and market participants across key points in the industry’s value chain.
A separate analysis of prevailing trends in the parent market, macro- and micro-economic indicators, and regulations and mandates is included under the purview of the study. By doing so, the report projects the attractiveness of each major segment over the forecast period.
Highlights of the report:
- A complete backdrop analysis, which includes an assessment of the parent market
- Important changes in market dynamics
- Market segmentation up to the second or third level
- Historical, current, and projected size of the market from the standpoint of both value and volume
- Reporting and evaluation of recent industry developments
- Market shares and strategies of key players
- Emerging niche segments and regional markets
- An objective assessment of the trajectory of the market
- Recommendations to companies for strengthening their foothold in the market
Note: Although care has been taken to maintain the highest levels of accuracy in TMR’s reports, recent market/vendor-specific changes may take time to reflect in the analysis.
Request For Customization:
This study by TMR is all-encompassing framework of the dynamics of the market. It mainly comprises critical assessment of consumers’ or customers’ journeys, current and emerging avenues, and strategic framework to enable CXOs take effective decisions.
Our key underpinning is the 4-Quadrant Framework EIRS that offers detailed visualization of four elements:
- Customer Experience Maps
- Insights and Tools based on data-driven research
- Actionable Results to meet all the business priorities
- Strategic Frameworks to boost the growth journey
The study strives to evaluate the current and future growth prospects, untapped avenues, factors shaping their revenue potential, and demand and consumption patterns in the global market by breaking it into region-wise assessment.
The following regional segments are covered comprehensively:
- North America
- Asia Pacific
- Latin America
- The Middle East and Africa
Read Our Latest Press Release:
Transparency Market Research is a next-generation market intelligence provider, offering fact-based solutions to business leaders, consultants, and strategy professionals.
Our reports are single-point solutions for businesses to grow, evolve, and mature. Our real-time data collection methods along with ability to track more than one million high growth niche products are aligned with your aims. The detailed and proprietary statistical models used by our analysts offer insights for making right decision in the shortest span of time. For organizations that require specific but comprehensive information we offer customized solutions through ad-hoc reports. These requests are delivered with the perfect combination of right sense of fact-oriented problem solving methodologies and leveraging existing data repositories.
Transparency Market Research State Tower,
90 State Street,
Albany NY – 12207
USA – Canada Toll Free: 866-552-3453
Email: [email protected]