The term Shock is a well-known topic among the pool community. Shock is referred to as a chemical treatment that is used to maintain the pool water. Pool water usually can not be cleaned naturally, and there is an enormous possibility of bacterial injection to our health if you do not clean the water properly. However, the shock is a process of cleaning the pool water by using hyper chlorinating to remove and wash out dirt, germs, bacteria, and algae. To achieve the required result, you have to use more than five times the amount that you usually use, depending on the size of the pool and the dirt. This article is focused on shocking a saltwater pool and how to maintain it.
Saltwater pool shocking is one of the most effective and best maintenance practices. If you have a saltwater pool at your mansion, you need to shock your pool on a regular basis to prevent any contamination.
Saltwater Chlorinator is a process of a swimming pool chlorination system that cleans the pool with the help of sodium chloride. Before using the saltwater chlorination process, the pool must have 3,000 ppm(parts per million) of salt concentration. A Saltwater pool is technically a chlorinated pool, but in terms of cleaning, you must have use chlorine with a different method. You have to turn up the power faster for effective results. The saltwater pool turns the salt cells into chlorine and starts its working process where you don’t need to use straight up chlorine into the water. Fun fact, the salt you are having on your kitchen table can be used as a saltwater chlorinator.
Saltwater pool shocking should be done once a week or after throwing a pool party. It will help to reduce the unwelcome bacteria and germs from your pool.
Should I shock my saltwater pool?
Well, the answer is yes. It is totally okay to use shock in your saltwater pool. Sometimes, using an electrical pool chlorinator cannot work properly and also causes pressure on the motor, which is why it will wear out faster. Also, the saltwater chlorinator always works super effectively as a shock and cannot reduce bacteria and algae from the pool. In the Opinion of poolity.com, these are some situations when you need to use shock.
- Removing algae from the pool: Chlorinator is best to remove black and green algae, bacteria, and germs from the pool. However, there are some overgrowth and tough algae you will find in the pool, which will not be likely to be removed from the pool. Here, you can use pool shock and for the tough algae, sprinkle some shock on it, scrub it and vacuum it when you are finishing your work.
- Removing Chloramines: After using strong bleach to clean the pool many times, we get a bad smell from it. It happens because of the chloramines. Test the chlorine level of the pool, and if it is higher than the free chlorine that it’s high time to shock your pool.
- Removing contamination: It is a normal thing to pee and pool in the pool. It’s gross, but there are sometimes when people have a really hard time controlling it.
- Balancing chlorine: Sometimes, the chlorine level of the water gets much higher than free chlorine. It might hamper your skin and hair. To avoid this situation, you should use shock in the pool to clean the water.
Shocking is a really important part when it’s about maintaining your pool. Many people become confused with the shocking and chlorinator when it comes to clean salt water as the salt water pool is technically high in chlorine. It is normal and possible to use shock in your saltwater pool when you need it. Also, it is an affordable cleaning process, whether buying a saltwater chlorinator can be a bit pricey and costly.
