Motor lamination materials which are made up of silicon steel helps in increasing the electrical resistance of magnetic fields to pass through it. Bonding lamination technology is expected to have leading revenue share as it helps in thinner laminations. Increasing demand for cars, electric vehicles, due to the rising emission norms may act as drivers for the market growth. Other than that, application of electric motors in consumer electronics, automobile motors using electric motors increases the requirement of motor laminations. Recent developments in the sector through research and development and investments by manufacturers are mentioned below.

Big River Steel in December 2020 successfully commissioned expansion of SMS Group supplied steel mill. The SMS group supplied the 3 million tonnes of mechanical equipments, electrical automation systems, and the digitalisation technology. With this, Big river steel operates two electric furnaces and two twin-ladle furnaces. The CSP plant of Big River Steel produces up to 1,930 millimetres wide coil which is making it one of the widest CSP plants in the world. The SMS group is a group of companies active in plant construction and mechanical engineering for the steel and non-ferrous metals industry.

Click Here To get a Sample Report (Including Full TOC, Table & Figures) – https://www.factmr.com/connectus/sample?flag=S&rep_id=1457

In 2019, EuroGroup Laminations have developed a ground breaking system using glue to firmly fasten laminations together and makes it possible to automatically stack the metal sheets inside the die and maintain excellent magnetic properties. This new technique called as GlueFastec, is perfect for a thin lamination sheet. These can be used in electric vehicles, as there is a trend to use thinner laminations because of the magnetic characteristics of its core pack. This GlueFastec technology can improve the motor efficiency allowing for high speed stamping and assembly of thin materials, without adding the mechanical stress.

In February 2022, Hyundai Motor launched Ioniq 5 electric crossovers in the family of electric vehicles. The model is based on new electric vehicle only platform using its own battery module technology requiring fewer components than Hyundai’s existing electric cars enabling faster production at lower cost. The company claims that Ioniq 5 will have a maximum driving range of about 50 kms, 20% more than Kona EV offering two battery pack options – 58- kilowatt hour or 72.6 kWh.

Introduction

Motor lamination materials are materials that are used in the fabrication of the motor unit. These materials enhance the properties of the motor unit & reduce losses. In the commercial market, motor lamination is often referred to as stator lamination & rotor lamination. Motor lamination materials are the metal part of the stator & rotor comprises thin lamination sheets piled together.

Motor lamination materials can be stacked, welded and bonded together, depending upon the need of the application. The motor lamination process is an integral part of motor designing and the selection of motor lamination material is of prime importance as many of the properties largely depend on the motor lamination material used. Heat rise, weight, cost and the motor output are some of the key characteristics which are extremely influenced by the type of motor lamination material used. Numerous types of motor lamination materials are present in the commercial market place.

The choice of motor lamination material for different weights & sizes of the motor assembly depends on various criteria and factors, such as permeability, cost, flux density and core losses. The processing of the motor lamination material may have a large influence on the efficacy of the unit being assembled.

In the commercial market, the demand for steel-based products as a motor lamination material is prominent. Silicon Steel is turning over as the preferred material of choice in the motor lamination materials market. Adding silicon to steel improves electrical resistance and increases the capability of the magnetic field. Also, silicon increases corrosion resistance ability of the silicon steel as a motor lamination material.

For entire list of market players, request for TOC here – https://www.factmr.com/connectus/sample?flag=T&rep_id=1457

Motor Lamination Material Market: Segmentation

On the basis of Product Type, the Motor Lamination Material Market can be segmented into:

  • Steel
    • Silica-steel
    • Cold-rolled
    • Grain-oriented
  • Nickel Alloys
  • Cobalt Alloys
  • Others

On the basis of Application, the Motor Lamination Material Market can be segmented into:

  • Electrical stators/rotors
  • Electric motors
  • Magnetic coils
  • Transformers
  • Others

On the basis of End use, the Motor Lamination Material Market can be segmented as:

  • Consumer Appliances
  • Power Infrastructure
  • Construction
  • Oil Gas Energy
  • Others

Motor Lamination Material Market: Region Wise Trends

The growing construction industry demands advanced construction equipment in order to cater the unmet needs.  With this expansion in construction industry, it is expected that the industry will create growth space for Motor Lamination Material manufacturers in North America & Europe. India, China and SEA & other pacific countries are likely to generate optimum opportunities for Motor Lamination Material manufacturers due to industrial expansion and expanding automotive & construction industry. Rapid urbanization and increasing disposable income in APAC region will augment the growth of the Motor Lamination Material market.

Latin America, Middle-East Africa and Eastern Europe are turning into emerging regions & manufacturing hubs for motor assemblies. It is expected that these regions will create significant sales in the Motor Lamination Material market.

Examples of some of the market participants across the value chain of the Global Motor Lamination Material Market include:

  • Big River Steel
  • Alliance Steel
  • Metglas
  • Tempel
  • Sinotech
  • LCS Company
  • Wingard Manufacturing Solutions
  • Polaris Laser Laminations
  • Advanced Technology & Materials Co., Ltd
  • TEUK Limited

For critical insights on this market, request for methodology here – https://www.factmr.com/connectus/sample?flag=RM&rep_id=1457

About Us:

Market research and consulting agency with a difference! That’s why 80% of Fortune 1,000 companies trust us for making their most critical decisions. While our experienced consultants employ the latest technologies to extract hard-to-find insights, we believe our USP is the trust clients have on our expertise. Spanning a wide range – from automotive & industry 4.0 to healthcare & retail, our coverage is expansive, but we ensure even the most niche categories are analyzed. Our sales offices in United States and Dublin, Ireland. Headquarter based in Dubai, UAE. Reach out to us with your goals, and we’ll be an able research partner.

Contact:

US Sales Office:
11140 Rockville Pike
Suite 400
Rockville, MD 20852
United States
Tel: +1 (628) 251-1583
Corporate Headquarter:
Unit No: AU-01-H Gold Tower (AU),
Plot No: JLT-PH1-I3A,
Jumeirah Lakes Towers,
Dubai, United Arab Emirates
Visit Our Website: https://www.factmr.com